ZZYN內反饋自力式壓力調節閥 ZZYN Internal Feedback Pressure Regulating Valve ZZYN內反饋自力式壓力調節閥是本公司針對介質粘度大、易結焦的工況而開發、研制的一類自力式壓力調節閥，避免了常規自力式壓力調節閥不易保溫，導壓管容易堵塞、影響調節精度的情況。適用于粘度、易結焦介質的泄壓穩壓的自動控制。該產品具有節能、動作靈敏、運行可靠、操作與維修方便等特點。廣泛應用于石油、化工等行業的原油等高粘度介質的泄壓穩壓的自動控制。
ZZYN type internal feedback self type Pressure regulator is the company according to the medium viscosity,easy coking conditions and development,research a kind of self type pressure regulator,to avoid the conventional self type pressure regulating valve is not easy to heat preservation,connecting pipe easy blockage,influence control accuracy.Suitable for high viscosity,easy coking medium pressure relief stabilized voltage automatic control.this product has the energy saving,action quick,reliable operation,operation and easy maintenance,etc.Widely used in petroleum,chemical and other industries of crude contour viscosity medium pressure relief stabilized voltage automatic control. 標準規格(Standard specifications) 形式Type | 內反饋自力式壓力調節閥 Internal Feedback Pressure Regulating Valve | 公稱通徑Body Size | DN20-DN450(3/4~18) | 公稱壓力Body Ratings | PN10,16,20,25,40,50,64,100,110,150,250,320,420; ANSI Class 150#,300#,600#,900#,1500#,2000#,2500# | 閥體及閥蓋材質 Body&Bonnet Material | WCB,CF8,CF8M,CF3,CF3M,WC1,WC6,WC9,LCB,LCC,LC3,哈氏C… | 填料Packing | V型聚四氟乙稀 V-PTEE/柔性石墨 Flexible graphite | 墊圈Gasket | GRAP+304,GRAP+316,PTEE | 開啟壓力偏差 Opening pressure error | 當設定壓力大于或等于0.5MPa時，其允許偏差為3%設定壓力，設定壓力小于0.5MPa時，其允許偏差為±0.014MPa。 When the set pressure is 0.5MPa or above,the allowable deviation is 3% of the set pressure.When the set pressure is less than 0.5MPa,the allowable deviation is ±0.014MPa. | 連接方式Connections | 法蘭型（RF、MFM）Flange type(RF,MFM)/焊接型（SW、BW）Welding type(SW,BW) | 涂層Painting Color | 棕色漆Brown painting/不銹鋼閥體可不涂漆No painting on stainless steel valve body | 壓力調節范圍 Pressure regulating scope(KPa) | 0.1~0.3 0.2~0.4 0.3~0.5 0.4~5.5 5~15 6.5~20 10~30 15~40 25~50 40~80 70~150 120~180 160~220 200~260 240~300 280~350 300~400 380~450 430~500 480~560 540~620 600~700 780~900 800~1000 950~1100 1000~1500 1400~2000等（高壓及特殊調節范圍根據實際情況定high pressure and special regulating scope shall be decided according to practical situations） |
注：以上只是標準組合，根據工況條件，本表以外的規格也是可能的。 Note:the above is just a standard combination,according to the working conditions,other specifications are also possible.
|
